Stove Repair in The Junction — Same-Day Gas & Electric

Q: How much does stove repair cost in The Junction?

Stove repair in The Junction costs $100–$350. Gas igniter $120–$200. Control board $200–$400. Gas valve $150–$300. Fixlify provides written pricing before work begins.

Q: Is a TSSA licence required for gas stove repair in The Junction?

Yes. Ontario law requires gas stove repairs by TSSA-licensed gas fitters. All Fixlify technicians carry the required certification.

Q: Is there a warranty on stove repairs in The Junction?

Yes. 90-day parts and labour warranty on all stove repairs in The Junction. Same-issue returns fixed at no charge.

Stove Repair in The Junction — TSSA-Licensed Gas & Electric, Price Locked Before Arrival

The Junction at Dundas West and Keele embodies Toronto's gentrification dynamic — half the stove repair calls come from brand-new Samsung and LG gas ranges installed during kitchen renovations, and half from 20-to-30-year-old GE and Whirlpool ranges in unrenovated homes. New installations generate first-failure warranty-adjacent calls as these ranges reach the 3-5 year mark. Older ranges need valve, igniter, and thermostat work typical of their age. The Junction renovation trend also creates a specific gas pressure issue that affects new high-BTU range performance.

Renovations install new high-BTU gas ranges on existing gas lines sized for smaller original ranges. Marginal gas pressure causes weak flames and slow oven preheating. Gas stove repair in The Junction requires TSSA-licensed technicians under Ontario law. Fixlify technicians carry the required TSSA gas fitter certification for all gas stove work. We never subcontract gas repairs to unlicensed personnel — every gas component we touch is serviced by a certified gas fitter who understands both manufacturer specifications and Ontario safety code requirements.

Common stove repairs in The Junction: gas burner igniter replacement ($120–$200), gas valve assembly ($150–$300), control board replacement ($200–$400), electric element ($80–$180), glass cooktop panel ($200–$450), infinite switch ($80–$150). Our technicians carry common parts for Samsung, LG, GE, Whirlpool stoves on every dispatch to The Junction.

Local tip for The Junction: If your new range heats slowly, have gas manifold pressure tested. Older Junction gas lines were sized for 30-40K BTU — modern 60K+ BTU ranges may need a regulator adjustment or line upgrade.

Gas vs. Electric Stove Repair in The Junction

The Junction homes contain both gas and electric stoves. Gas repair requires TSSA licensing, pressure testing, and gas valve expertise. Electric repair involves element testing, infinite switch diagnostics, and control board work. Dual-fuel ranges need both skill sets on a single visit. Fixlify technicians are certified for both gas and electrical appliance work.

Our The Junction Stove Repair Process

Book Online or Call: Choose a time at fixlifyservices.com. Same-day slots available.
TSSA-Licensed Technician Arrives: Fully equipped, arrives within 2–4 hours in The Junction.
Gas Safety Check + Diagnosis: Gas line inspection, burner-by-burner testing, error code retrieval.
Written Quote: Firm price before any work. You approve or decline — no pressure.
Repair Completed: Most repairs done same visit. 90-day warranty included.

Stove Repair Costs in The Junction

Repair	Typical Cost
Diagnostic (waived with repair)	$80
Gas Igniter Replacement	$120–$200
Gas Valve Assembly	$150–$300
Control Board Replacement	$200–$400
Glass Cooktop Panel	$200–$450
Electric Element	$80–$180

Book Online

Book Stove Repair in The Junction

Same-day available. TSSA-licensed technician arrives within 2–4 hours.

Choose Your Appointment Time

How Fixlify Diagnoses Stove Problems in The Junction

When you book stove repair in The Junction through Fixlify, our TSSA-licensed technician arrives with diagnostic tools and manufacturer-specific knowledge for the early 1900s detached and semi-detached homes, many renovated found in this neighbourhood.

Gas safety inspection: Flex connector, shutoff valve, and burner cap seating checked before component testing. Required by Ontario TSSA regulations.
Burner performance evaluation: Each burner tested individually for ignition timing, flame colour and shape, heat output, and simmer stability.
Ignition system diagnostics: Spark module output, electrode alignment, and igniter amperage measured. Gas oven igniters must draw 3.0+ amps to open the safety valve.
Control and switch testing: Multimeter verification of infinite switches, gas valve solenoids, and control board error codes.
Written quote: Exact repair cost confirmed before work begins. The $80 diagnostic fee is waived if you proceed with repair.

Warning Signs — Call Fixlify Immediately in The Junction

Gas smell with all burners off — potential leak. Open windows, leave, call your gas utility first, then call us.
Yellow or orange flame instead of blue — incomplete combustion producing carbon monoxide. Immediate professional attention required.
Oven igniter takes 90+ seconds to light — weakening igniter approaching failure. Preventive replacement saves an emergency call.
Constant clicking after burners turned off — spark module short or moisture intrusion. Potential fire hazard.
Cracked glass cooktop with visible element — electrical shock hazard. Do not use affected zone.

Why The Junction Homeowners Choose Fixlify for Stove Repair

TSSA-licensed gas technicians — every technician carries Ontario gas fitter certification
Same-day dispatch to The Junction — arrive within 2–4 hours, call before 2 PM
Samsung, LG, GE, Whirlpool specialist — common parts carried on every truck
Written pricing before work begins — no hidden fees, $80 diagnostic waived with repair
90-day warranty — parts and labour, same-issue returns fixed free
Online booking at fixlifyservices.com — under 90 seconds, instant SMS confirmation

Stove Maintenance Tips for The Junction

Clean burner caps and ignition ports monthly with a pin — food debris causes ignition delay
Inspect gas flex connectors annually — replace if older than 10 years
Use flat-bottomed cookware on glass cooktops — warped pots cause hot spots and cracks
Limit self-clean to once every 3-4 months — extreme heat stresses control boards
Keep flammable items 30 cm from stove — leading cause of kitchen fires in Canadian homes

FAQ

Stove Repair FAQ — The Junction

How much does stove repair cost in The Junction?

Stove repair in The Junction costs $100–$350. Gas igniter replacement $120–$200. Control board $200–$400. Gas valve $150–$300. Written pricing confirmed before work begins.

Do you offer same-day stove repair in The Junction?

Yes. Book at fixlifyservices.com for live same-day slots in The Junction. Call (437) 524-1053 before 2 PM for same-day dispatch. Technician arrives within 2–4 hours.

Do you repair gas stoves in The Junction?

Yes. All Fixlify technicians are TSSA-licensed for gas appliance work in Ontario. We repair Samsung, LG, GE, Whirlpool and all major brands in The Junction including Samsung, LG, GE, Whirlpool, Bosch, Frigidaire.

Is a TSSA licence required for gas stove repair in The Junction?

Yes. Ontario law requires all gas stove repairs by TSSA-licensed gas fitters. Never hire an unlicensed technician for gas work — it is both illegal and dangerous. All Fixlify technicians carry the required certification.

What stove brands do you repair in The Junction?

We repair all major brands in The Junction: Samsung, LG, GE, Whirlpool, Samsung, LG, GE, Whirlpool, Bosch, Frigidaire, Kenmore, Maytag, KitchenAid. Common parts carried on every truck.

Is there a warranty on stove repairs in The Junction?

Yes — 90-day parts and labour warranty on every stove repair in The Junction. Same-issue returns within the warranty period fixed at no charge. Warranty terms stated in your booking confirmation.

Stove Repair in The Junction — Same-Day Booking